NEC Storage Performance Monitor/Optimizer User Manual page 150

Appendix A Commands of Performance Monitoring/Optimization Function
[USAGE ]
Example: Move data between the logical disk 000ah and the work disk for optimization 0010h.
Select the default LD movement speed (auto).
iSMprfctl start_ldmv -arrayname NECStorage4100/10 -ldn ah -wkldn 10h
Example: Move data between the logical disk 10 and the work disk for optimization 16. Select the
default LD movement speed (auto).
iSMprfctl start_ldmv -arrayname NECStorage4100/10 -ldn 10 -wkldn 16
Example: Move a logical disk by specifying the nickname. The volume formats of both the logical
disk to be moved and the logical disk for optimization are "NX". The volume name of the
logical disk to be moved is "nx1/c22", and the volume name of the logical disk for
optimization is "nx1/c23". Select the default LD movement speed (auto).
iSMprfctl start_ldmv -arrayname NECStorage4100/10 -ldname NX:nx1/c22
-wkldname NX:nx1/c23
Example: Move a logical disk by specifying the nickname. Omit the volume formats. The volume
name of the logical disk to be moved is "nx1/c22", and the volume name of the logical disk
for optimization is "nx1/c23". Select the default LD movement speed (auto).
iSMprfctl start_ldmv -arrayname NECStorage4100/10 -ldname nx1/c22
-wkldname nx1/c23
Example: Move data between the logical disk 000ah and the work disk for optimization 0010h.
Select the maximum data transfer rate (high) as the LD movement speed.
iSMprfctl start_ldmv -arrayname NECStorage4100/10 -ldn ah -wkldn 10h
-speed high
21