NEC Storage Performance Monitor/Optimizer User Manual page 48

Chapter 3 Operations of Performance Monitoring Function
(9) Changing Graph Scales
A maximum value of a graph scale displayed on the Bar Graph screen is changeable freely on the Setting Graph
Scale dialog. The Setting Graph Scale dialog is displayed by selecting [Setting]
Figure 3-9 shows an example of display of the Set Graph Scale dialog screen.
For specifying a desired maximum value of a graph scale, uncheck the check box of [Autoscale] on the Setting
Graph Scale dialog, and specify a new maximum value. If [Autoscale] check box is checked, graph scales are
automatically calculated based on the past load states.
(10) Record Screen Information
When you select [Record Screen Information] from the [View] menu, the current location and size of the
Performance Monitoring screen, information on display/non-display of the tool bar and status bar, and the size
and arrangement of the graph display area and legend display area can be recorded. When screen information is
recorded, next time when you open the Performance Monitoring screen, it is displayed in the state when the
location and size of the screen, display/non-display of tool bar and status bar, and the ratio of the graph display
area to the legend display area was recorded.
For screen images, refer to Figure 3-6 "Time-series Graphs Screen".
Figure 3-9 Set Graph Scale Dialog
I-42
[Set Graph Scale] menu.