Table of Contents
Advertisement
Chapter 3 Operations of Performance Monitoring Function
(2) Thresholds setting
On the Numeric Table screen, select the line (Note 1) or cell (Note 2) of the threshold monitoring element for
which you want to set a threshold. Then, select [Threshold Monitoring]
Threshold dialog appears.
Figures 3-14 and 3-15 are display samples for setting a threshold by selecting the cell of I/O Density of the logical
disk number 0003h. Figures 3-16 and 3-17 are display samples for setting a threshold by selecting the line of
the logical disk number 0003h.
(Note 1) To select a line, left-click at the left end of the line.
(Note 2) To select a cell, left-click the cell.
Figure 3-14 Set Threshold Menu (Select a cell)
I-46
[Set Threshold] menu. The Set
Advertisement
Table of Contents
