Advanced Menu - NEC PowerMate 2000 Series Service And Reference Manual

Menu Item
Plug and Play OS
Reset Configuration Data
PCI Configuration
PCI IRQ Line 1
PCI IRQ Line 2
PCI IRQ Line 3
PCI IRQ Line 4
Cache Memory
Memory Cache
Cache System BIOS
Area
Cache Video BIOS
Area
Cache Base 0-512K
Cache Base 512-640K
Cache Extended
Memory Area
Cache C800-CBFF
Cache CC00-CFFF
Cache D000-D3FF
Cache D400-D7FF
Cache D800-DBFF
Cache DC00-DFFF

Advanced Menu

Settings (default is bold)
No, Yes
Select Yes if booting a Plug and Play capable operating
system.
Select No if you want the BIOS to configure non-boot devices.
No, Yes
Select Yes if you want to clear the Extended System
Configuration Data (ESCD) area.
Press Enter to access the following submenus.
Disabled, Auto Select, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
Use Auto Select if there are no ISA or EISA devices installed
on the system.
Select an IRQ (3-15) if installing a PCI device requiring an IRQ
and if the IRQ is not already in use by ISA or EISA devices.
Press Enter to access the following submenus.
Disabled, Enabled
Sets the state of the memory cache.
Uncached, Write Protect
Controls caching of system BIOS area.
Uncached, Write Protect
Controls caching of system video BIOS area.
Uncached, Write Through, Write Protect, Write Back
Controls caching of 512K base memory.
Uncached, Write Through, Write Protect, Write Back
Controls caching of 512K-640K base memory.
Uncached, Write Through, Write Protect, Write Back
Controls caching of system memory above one MB.
Disabled, Write Through, Write Protect, Write Back
Setting at Disabled prohibits caching.
Setting at Write Through permits writes to be cached and sent
to main memory at once.
Setting at Write Protect causes the BIOS to ignore writes.
Setting at Write Back permits write caching but delays sending
data to main memory until necessary.
System Configuration 2-13