Editing A Stitch - Pfaff perfomance 2058 Owner's Manual

Touch s+ to add the stitch to Stitch Creator. The stitch appears
individually on the workspace and is automatically selected. Touch
the select stitch point icon to deselect the stitch. You can now edit
every single stitch point of the stitch to make your own version of it or
combine it with other stitches.

Editing a stitch

With Stitch Creator you can select and edit single stitch points of your
stitch. Use the scroll buttons (4) to move the selection point stitch by
stitch through your entire stitch. Press the left scroll button to get from
the first stitch point of your stitch to the last and vice versa.
To select several stitch points touch the select stitch point icon and use
the scroll buttons (4). Long touch the icon if you wish to select all stitch
points. The selected stitches become thicker on the screen. Touch the
icon again to deselect the stitch points.
Moving single stitch points
With your stylus you can move the selected stitch point(s) directly
on the workspace. Simply touch the desired position of the current
selected stitch point to move it. This will also change the stitch width
and stitch length of the selected stitch.
Note: If several stitch points are selected you can only move them
vertically in the workspace.
Another way to move the selected stitch point(s) and for fine
adjustments is to use the stitch point position and stitch length
adjustment icons.
With the stitch point position adjustment icon you can change the
position of a selected stitch point up and down in the workspace.
Touch the icon and make the adjustment by using the function field
buttons (5). If you change the position of a single stitch point up or
down you automatically change the stitch width.
With the stitch length adjustment icon you can change the stitch length
of a selected stitch. Touch the icon and make the adjustment by using
the function field buttons (5). The stitch length can be set from -6 to
5
6mm. This icon is not active if more than one stitch point is selected.
Mirroring the stitch points
Select one or more stitch points. Touch the end to end or side to side
mirroring icon to mirror the stitch point(s) end to end or side to side.
Changing the whole stitch in the sewing menu
You can also alter the settings of the entire stitch in the sewing menu
before you sew it (see page 3:7). Touch the start sewing icon to open
the stitch in the sewing menu.
Stitch Creator
7:5