Presser Foot Lift; Changing The Presser Foot - Pfaff perfomance 2058 Owner's Manual

Preparations

Presser foot lift

The presser foot is raised manually by swinging the presser foot lift up
to the right. It is lowered by swinging it down to the left. See page 3:9
on how to raise and lower your presser foot automatically.

Changing the presser foot

Turn off the on/off switch
Snap off the presser foot
Press the front part of the presser foot up and, at the same time the rear
part down until it disengages from the presser foot holder.
Snap on the presser foot
Place the presser foot under the presser foot holder, so that when the
presser foot lift is lowered the pins of the foot snap onto the presser
foot holder.
Check that the presser foot is properly attached by raising the presser
foot lift.
2:3