Creating A New Stitch Sequence - Pfaff perfomance 2058 Owner's Manual

C
F B
A E

Creating a new stitch sequence

D
In the stitch sequence menu you can see the selected stitch in the
preview field (A). To insert the stitch to a sequence touch the icon m+.
The stitch is added to the action field (B), to the right of the cursor (D).
To delete a stitch from the action field touch m-. The stitch to the left of
the cursor is deleted.
If you want to insert or delete a stitch before an already added stitch,
activate the action field (B) by touching it and use the scroll buttons (4)
to move the cursor (D) to the wanted position. You can also touch any
stitch in the sequence to select it and position the cursor to the right of
the selected stitch. The numbers (E) show the position of the selected
stitch out of the total number of stitches in your sequence.
If a stitch sequence extends over more than one display width, an
arrow appears (C) on the left or right border of the action field,
indicating one or more preceding pages.
Select stitches to a sequence
There are several ways to call up stitches that you wish to add in the
stitch sequence:
1. Selection by scroll buttons. Activate the preview field (A), by
touching it. Use the scroll buttons (4) to browse through all stitches,
including stitches created and stored in Stitch Creator. To insert a
stitch to the sequence touch m+.
2. Selection by repetition. Touching m+ once again inserts the same
stitch once more with the same settings. If you wish to insert
the same stitch but with changed settings, you can either do the
changes to the stitch before inserting the stitch with m+ or after you
have inserted the stitch by selecting it in the sequence.
3. Selection by number. Press the selection by number button (7) to
open the selection by number keypad. Enter the number of the
stitch you wish to use and touch "ok". Touch m+ to insert the
stitch to the sequence.
If you select a stitch that cannot be used in a stitch sequence a pop-
up message is displayed: "This stitch cannot be used!" Close the
pop-up window by touching it.
4. Selection by category. Touch the stitch selection menu icon (F) to
open the stitch selection menu. Only categories with stitches that
can be used in a stitch sequence are available. Choose a category
and then the stitch you wish to use. Touch m+ to insert the stitch to
the sequence.
From here you can also insert stitches created and stored in Stitch
Creator. Choose "Stitch Creator sts." and then touch the stitch you
wish to insert. Touch m+ to insert the stitch to the sequence.
Note: The eyelet stitch, no. 59 and the stippling stitch no. 73, can
be used in stitch sequences but cannot be selected by category
since the buttonhole and the darning and bartack categories are
unavailable. To select stitch no. 59 or 73, use one of the other
methods mentioned above.
Stitch sequences
6:3