Pfaff perfomance 2058 Owner's Manual page 26

Winding the bobbin through the needle
It is possible to wind the bobbin even when the machine is threaded.
Raise the presser foot to the up position. Pull the needle thread
underneath the presser foot and up through the right-hand threading
slot.
Pull the thread from left to right through the take-up lever D.
Important: The take-up lever must be at its highest position.
Pull the thread under the thread guide C
(from back to front).
Place an empty blue bobbin on the bobbin
winder aligning the small rectangular
hole on the bottom side of the bobbin
with the small white pin of the bobbin
winder. The Pfaff logo is facing up.
Wind the thread tail clockwise several
times around the bobbin. Turn on the
machine. Hold the thread tail firmly and
press the foot control.
As soon as the bobbin is full the winding
action will be stopped automatically.
Push the bobbin to the left, cut the thread
and remove the bobbin from the winder.
2:8
D
C