Automatic darning - No 74 and 75
Stitches no. 74 and 75 is for strengthening damaged areas of fabric and
repairing tears.
• Stitch over the damaged area a little longer than your tear.
• Press the reverse button (10); the machine finishes sewing the
darning program and the darning length is saved.
The saved darning length can now be repeated as often as needed.
Depending on the type of fabric, the darning pattern may shift slightly
out of square. You can straighten the pattern using the balance
adjustment capability.
Touch the balance icon and fine tune the stitch balance with the
function field buttons (5).
Note: To give the best strength to the darning stitch it should be
slightly out of square.
To straighten a pattern that shifts this way, correct the balance in the
plus-section.
To straighten a pattern that shifts this way, correct the balance in the
minus-section.
Utility Sewing
4:11