Adding Stitches To The End Of A Pattern; Deleting A P-Memory - Pfaff Creative 7530 Instruction Manual

7,
Adding stitches to the end of a pattern
After pressing the "edit / 1" key, the position of
the cross hairs appears in the display. Press the
numbered key 9 and you will see the width and
length coordina tes of the last entered stitch.
You can now go to the new position with the
magnifier (6) and then to get to the end position.
press numbered key 0.
Then press the "mem
+"
key of the Creative
Designer and your new stitch is added. If you
wish to insert a stitch before the beginning of a
motif, go back with key 9 until number .1 appears.
Now enter the new point as describe d
I-
info
T
•
•_\
L
r
L
Deleting a P-memo ry
If you have reached the maximum
memory
capac
ity of a P-memory, the message appears in the
display:
"Memor y full"
With "o.k." you can return to the selected P-mem
ory and you can then leave it with "edit!
".Your
P-memory is now ready to sew. You can, however,
also delete it by pressing the
"cIear'"
key. The com
puter will ask you to confirm this command.
The message appears in the display:
"Delete pattern"
ok?
By pressing the "o.k." key you delete what is
saved in the memory.
If the machine is switched on while the "clear"
key is pressed, all the P-memo ries and M
memorie s are deleted without the compute r
asking you to confirm the delete.
L
splay
clear
1 2 3 4
5 6 7
8 9
0
1.
I. .
-
._2*
2 3 4 5 6 7
8
9
0
dispy
84