Threading The Needle Thread - Pfaff Creative 7530 Instruction Manual

Threading the needle thread
Switch off the on/off switch
Raise the sewing foot and turn the hand wheel
until the take up lever (35) has reached its
highest position.
Place the thread on the reel holder (39) and fit
the corresponding unwinding disk.
Now pull the thread into guide A, following the
arrows. Pass the thread to the right or the left of
tension disk B and downwards through the left
threading slot (33).
Pull the thread around stop E into the right hand
threading slot and upwards to the take up lever
(35). The thread must be pulled into the take up
lever (35) from left to right and downwards again
in the right hand threading slot.
Finally, pass the thread from the side behind one
of the two thread guides (32).
1
I
I
Sa
For t
The I
The
As
Ii
codi
The
Of C(
The'
or c
Cut
mus
Only
mus
1 he
sup
Plea
L
L
I.
26