Sewing On Buttons; Sewing On Buttons With Thread Shanks - Pfaff Creative 7530 Instruction Manual

Sewing on buttons
With program
09 you can sew on two- or four-
hole buttons without any problems.
• Remove the sewing foot and lower the bottom
feed.
• Place the button on the place marked.
• Turn the handwheel towards you and position
the button so that the needle enters the left
hole in the button.
• Now lower the presser foot lifter; the button is
now held by the sewing foot holder.
• Now sew on the button. Make sure that the
needle also enters the right hole in the button.
• The machine sews a tack and the program is
completed.
When selecting sewing help with the "display"
key the upper display line shows "lower' i.e. you
are reminded that the bottom feed must be
lowered.
• Remove the match and pull the button and
fabric apart.
• Wrap the shank with sewing thread and knot it.
Sewing on buttons with thread shanks
• Insert the sewing foot
• Place a match between the holes of the
button and sew it on as described on the left.
U)
UI
t
P1
101