Notes On Safety; Environment; Treatment; Cleaning - Pfaff Creative 7530 Instruction Manual

in DIN
IEC
1
.
The user must exercise adequate caution
with regard to the up and down moving
needle and constant ly observe the
sewing area while working .
2.
3. The maximu m permissa ble wattage for
the sewing lamp is 15 watts.
4. The tension of the drive belt may only be
adjusted by a Pfaff mechani c.
5.The machine is to be put into operatio n
accordin g to the indicatio ns on the
specifica tion plate.
6. Do not place any objects in opening s on
the machine .
7. Do not use the sewing machine if:
—
there is visible damage
—
its function is disturbe d
—
it is wet, e.g. with condens ation.
8. Do not pull the mains plug out of the
socket by its cord.
9. No liability will be accepted for any dam
age caused if this machine is used for
any purpose other than that for which it
is intended .
1 0. To avoid the risk of electric shock, do not
open the machine . There are no parts
inside the machine which the user can
repair. This is solely the responsi bility of
our qualified service staff.
11. Only original PFAFF parts may be used.
The recomm ended environm ent is:
Ambien t temperat ure —1O C to +400
C
Humidit y 20% to 80%.
This sewing machine is a high-qua lity electro
nic-mech anical applianc e; it is a machine for
supervis ed use in the home. It should be oper
ated in such a way that it is not subjecte d to:
dust, severe dampnes s, direct sunlight , static
electricit y, heat-pro ducing objects, corrosiv e
chemica ls or liquids.
The machine is to be used on a firm and
even surface which is open for ventilati on
purposes .
Always protect the machine against damage
which could be caused by it being hit or
dropped .
Housing and display:
To clean the housing use a dry, clean, soft,
lint-free cloth.
To remove any stubborn dirt, use a soft cloth
with alcohol or paraffin.
Do not use any insectici des or chemica l
products such as petrol or liquid chemica ls
to clean the housing.
3