Description Of The Sewing Function Keys - Pfaff Creative 7530 Instruction Manual

Description of the sewing function keys
Reverse key (27)
When the reverse key is pressed, the green diode
lights up and the machine sews backwards. By
pressing this key again, the machine sews
forwards.
To tie off, hold this key pressed a little while.
In addition, you can use this key to define the
bartack for a buttonhole or the length of a
darning program.
Bobbin thread monitor (1)
The red diode blinks when the bobbin thread is
nearing its end.
Twin needle key (2)
Press this key when sewing with twin needles. The
stitch width will automatically be decreased by
2 mm to avoid the needle hitting the sewing foot.
If the twin needle key is pressed in combination
with the program 00, it is not possible to change
the needle position. If another pattern is
subsequently selected, the message appears in
the display:
Twin needle
Round hole needle plate?
Made in Germany
L
L
L
L
L
Sai
L
L
Now key (2) must be pressed to disengage the
twin needle function and then another pattern
can be selected.
Slow sewing (3)
By pressing this key, the sewing speed of the
machine is reduced.
[
Needle stop (4)
With this key you can determine whether the
needle should stop in the fabric (down position)
or at its highest point (up position) when releas
ing the foot control.
"Tie-off key (5)
By pressing this key, the beginning and end of
your seam will be automatically tied-off.
I.
[
L
L
40