Keyhole Buttonhole With Gimp Thread - Pfaff Creative 7530 Instruction Manual

• Place the gimp thread over the front ridge.
Pull the thread ends taut backwards under the
sewing foot. Clamp them right and left of the
back ridge respectively.
• Before you start sewing, press the "needle
down" key (4).
• Sew the first buttonhole seam.
U)
a)
z
=
c_)
-=
0
40
O 4-'
'-
ii
0=
119
II
Keyhole buttonhole with gimp thread
mark,
• Push the runner forwards up to the second red
h
• When the machine sews the first stitches of
the eyelet, pull down the gimp thread from the
back ridge using an ordinary pin.
Important: The sewing foot may not be raised
during this procedure!
• Pull the gimp thread to the left and backwards
until the loop is just in front of the needle.
• Now sew the eyelet carefully.
• Then, hold the gimp thread slightly tauter and
finish sewing the buttonhole. Cut off the loose
ends of the gimp thread.
The round buttonhole with gimp thread is
sewn in the same way.
L