Cross Stitch Motif “Rabbit” - Pfaff Creative 7530 Instruction Manual

Draw the desired cross stitch motif on graph
paper.
Divide this motif into blocks which can be
entered into the memories as pattern
combinations.
Now mark the starting point of the first cross
stitch in each memory. The start and end
points of the cross stitches are particularly im
portant as they determine the stitch direction.
A cross stitch that finishes on the right can
only be combined with a cross stitch that
starts on the right. The starting points are
marked with a small circle and the end points
are marked with a dot.
ip: With the
""
key, you can transfer starting
ioints from left to right and from right to left.
• Mark each memory with a number and arrows
for the respective sewing direction.
• Press the
key for pattern sequence.
• Now enter the selected cross stitches into an
empty M-Memory.
• To sew the pattern, recall the programmed me
mories successively by pressing the "single
pattern" key" (
• After you have finished sewing the first me
mory, pull the threads to the reverse side of
the fabric and knot them together.
• Select the next memory. When you position
the sewing foot, watch the crosswise lines on
stitch foot 2A.They should be aligned with
the starting points of the adjoining cross
stitches.
• Allow the left metal edge in the window of the
foot to move exactly along the line of the previ
ously sewn pattern. In this way you can avoid
spaces between adjoining pattern sequences.
• Sew the individual memories one after the
other. Then iron the embroidered motif on the
reverse side of the fabric.
U)
a,
C.,
+0
U,
U)
2
0
(07
a
=
)
0
0
Q) = c
Wce
M5
ross stitch motif "rabbit"
:or this motif, the following combinations have
een stored:
Vii— 4x90/91
V12— 2x92/4x 90/91/3x 90/2x91 /
3 x 90 / 92
i13— 9x91
V14— 3x90
V15— 2x91/4x 90/92/3x 90/2x92 /
3 x 90 / 91
4116— 4x90/92
4117— 92/5x90 /92
4118— 3x92
4119— 3x91
M2
145