Control Panel & Remote Control
Control Panel
Using the Control Panel
Off
Power On
Shutter
Source
Zoom
Focus
Shift
VGA
VGA 2
Menu
User Controls
Turn off the projector.
Turn on the projector.
Open/close the built-in shutter.
Press "SOURCE" to select an input
signal.
Adjust lens zoom function.
Adjust lens focus function.
Adjust Lens shift up/down/left/right.
Press "VGA " to choose source
from VGA-IN connector.
Press "VGA 2" to choose source
from VGA2-IN connector.
Press "Menu" to launch the on-
screen display (OSD) menu. To exit
OSD, Press "Menu" again.
2
English