Precautions - Optoma Projector with lens cover User Manual

Precautions

Please follow all warnings, precautions and mainte-
nance as recommended in this user's guide.
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
Usage Notice
Do not look into the projector's lens when the
lamp is on. The bright light may hurt your eyes.
To reduce the risk of fi re or electric shock, do
not expose this projector to rain or moisture.
Please do not open or disassemble the projec-
tor as this may cause electric shock.
When replacing the lamp, please allow the unit
to cool down. Follow instructions as described
on pages 78-79.
This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
Reset the "Lamp Reset" function from the
on-screen display "OPTIONS | Lamp Settings"
menu after replacing the lamp module (refer to
page 57).
When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 60 seconds for the
projector to cool down.
Do not use lens cap when projector is in opera-
tion.
When the lamp is approaching the end of its
lifetime, the message "Lamp Warning: Lamp
life exceeded." will show on the screen. Please
contact your local reseller or service center to
change the lamp as soon as possible.
Do not look into or point the laser pointer on
your remote control into your or someone's
eyes. Laser pointer can cause permanent dam-
age to eyesight.
Do not transport the projector with any lens
installed.
3
English