Led Lighting Messages; On Screen Messages - Optoma Projector with lens cover User Manual

N
OTE
Steady light 

No light 


LED Lighting Messages

Message
Standby State
(Input power cord)
Power on (Warming)
Power on & Lamp lighting
Power off (Cooling)
Error (Lamp fail)
Error (Fan fail)
Error (Over Temp.)
Burn in (Lamp off)
Shutter on

On Screen Messages

Lamp warning:

If the remote control does not work
Check the operating angle of the remote control is within ±30°

both horizontally and vertically of one of the IR receivers on
the projector.
Make sure there are not any obstructions between the remote

control and the projector. Move to within 2 m (±0°) of the
projector.
Make sure the batteries are inserted correctly.

Replace batteries if they are exhausted.

Ensure that you have set your remote to the correct IR code

set (see page 25).
Appendices
Power LED Temp LED
(Red) (Blue) (Red)
Flashing
Flashing
Flashing
Flashing
Flashing Flashing
Flashing
Flashing Flashing
Lamp LED Shutter LED
(Orange) (Orange)
77
English