Table of Contents
Advertisement
Quick Links
Table of Contents
Precautions .......................................................................................... 2
About the Product ................................................................................. 3
Package Overview ............................................................................... 4
Product Overview ................................................................................. 5
Connecting the Projection Display ....................................................... 8
Powering On/Off the Projection Display ............................................... 9
Adjusting the Image Size ...................................................................... 10
User Controls
User Controls ....................................................................................... 12
OSD Menus ......................................................................................... 14
Troubleshooting .................................................................................... 18
Maintenance ......................................................................................... 20
Specifications ....................................................................................... 23
Compatibility Modes ............................................................................. 24
English
1
Advertisement
Table of Contents
Related Manuals for Optoma Optoma EP 610 (H)
Summary of Contents for Optoma Optoma EP 610 (H)
-
Page 1: Table Of Contents
Table of Contents Usage Notice Precautions ... 2 Introduction About the Product ... 3 Package Overview ... 4 Installation Product Overview ... 5 Connecting the Projection Display ... 8 Powering On/Off the Projection Display ... 9 Adjusting the Image Size ... 10 User Controls User Controls ... -
Page 2: Usage Notice
English Usage Notice Do not look into the lens. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this Warning- product to rain or moisture. Please do not open or disassemble the product as this may cause Warning- electric shock. -
Page 3: Introduction
Introduction About the Product This product, designed with a high-powered UHP lamp, is an SVGA data/video portable projection display. The outstanding feature of it are listed as follows: 8.9 lbs. (4.0 kgs) lightweight compact design True SVGA, 800 x 600 addressable pixels With XGA compression and VGA resizing Mac / NEC PC-98 / FM Towns compatible NTSC / PAL / SECAM compatible... -
Page 4: Package Overview
English Package Overview This projection display comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. LCD Projection Display Power Cord VGA Cable S-Video Cable RCA Audio/ Video Cable Audio-in Cable for Computer Warranty Card... -
Page 5: Installation
Installation Product Overview w Main Unit Speakers Carrying Handle Elevator Releasing Button Elevator Foot Air Filter * There are two elevator releasing buttons and elevator feet on both sides. * There are also two remote control receivers on the front and the rear side. Panel Controls English Remote Control Receiver... -
Page 6: Connection Ports
English w Connection Ports Audio Input for Computer Composite Video Connector S-Video Connector w w w w w Panel Controls Four Directional Select Keys Enter Audio Output Connector Audio Input Connector Monitor Loop-Through Connector Computer 2 Input Connector Power Connector Computer 1 Input Connector... -
Page 7: Remote Control
English w Remote Control Reset Freeze/CLR Power/Standby Keystone Zoom In / Zoom Out Resync Source Tracking Mute Volume Four Directional Select Keys Menu Enter... -
Page 8: Connecting The Projection Display
English Connecting the Projection Display Audio Cable RCA Audio Monitor Cable Video Cable S-Video Cable VGA Cable Audio Cable Power Cord... -
Page 9: Powering On/Off The Projection Display
1. Remove the lens cover 2. Plug the power cord into the back of the projector and plug it into the electrical outlet. The “POWER/STANDBY” LED indicator will flash green. 3. Turn on the lamp by pressing “ POWER/STANDBY” button. -
Page 10: Adjusting The Image Size
English Adjusting the image size w w w w w Adjust the height of projected image Raise the projection display to the desired angle and then press the elevator release buttons to release the elevator foot. ‚ Fine-tune the height by manually turnig each foot. (Refer to the following figures below) Screen Elevator Foot... - Page 11 w w w w w Adjusting the Image Size [ ] Maximum ( ) Minimum 27” Max. Screen Min. 20” (inch) Distance(ft.) 3.8’ 20” Screen Size ) inch W x H 16 x 12 *The graph is for user’s reference only. w w w w w Focus the image You may adjust zoom ring to zoom in/out 1.3 times of the image size.
-
Page 12: User Controls
English User Controls User Control Overview There are two ways for you to control the functions: panel control and remote control. Panel Control Remote Control... - Page 13 Press “Menu” to open the on-screen display (OSD) menus and to switch among different menus. To exit OSD, press the “Freeze/CLR” button or select the “ Exit Menu” icon and press “Enter” button. The projector saves any changes you made automatically. Source Press “Source”...
-
Page 14: Osd Menus
OSD will be the “Computer OSD”. When in Video source, the OSD will be the “ Video OSD”. The projector will detect the source automatically. To open the OSD menus, press the “Menu” button on the Remote Control or Panel Control. - Page 15 Auto-Image The projector automatically adjusts tracking, frequency and vertical and horizontal position for most computers. * The image options are available only for computer sources. The projector can set these options automatically for video sources. Audio Volume Press the left button to decrease the volume.
- Page 16 When you select this function, the projector truns the image upside down for ceiling-mounted projection. Rear-Ceiling When you select this function, the projector reverses and truns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. 16 : 9 (Video mode only) You can select this function to fit your DVD aspect ratio type.
-
Page 17: Lamp Warning
Lamp Lamp Warning Choose this function to show or hide the warning message when the lamp changing warning message displayed. Lamp Reset Reset the lamp setting only when the lamp changing is done. Exit Menu Exit Menu When you like to close the OSD menus, choose this item and select “ YES” to exit menu. Reset All Choose “... -
Page 18: Appendices Troubleshooting
Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. If the projector is plugged into a power strip, make sure the power strip is turned on. Ensure the pins of connectors are not crooked or broken. - Page 19 Check and reconfigure the display mode of your graphic card to make it compatible with the product. Problem: Image is out of focus Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance (1.2m - 11m) from the projector.
- Page 20 English Problem : The screen is outstretched when displaying 16:9 DVD. The projector itself will automatically detect 16:9 DVD and adjust the aspect ratio by digitization to full screen with 4:3 default setting. If the projection display is still outstretched, you will also need to adjust the aspect ratio by referring to the following: Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.
-
Page 21: Maintenance
Maintenance Cleaning the Air Filter Cleaning Procedure: 1. Turn off the power. 2. Remove the air filter cover. 3. Remove the air filter from the filter cover. 4. Clean the air filter with a vacuum cleaner. 5. Place the air filter back in position. Make sure the air filter is fully inserted. Do not clean the filter with water. -
Page 22: Changing The Lamp
English Changing the lamp The projection display will detect the lamp life itself. It will show you a warning message when the lamp is used over working hours. When you see this message, change the lamp as soon as possible. Make sure the projection display has been cooled for at least 60 minutes before changing the lamp. - Page 23 English 4. Unscrew the 2 screws of the lamp module and pull out the lamp module by the handle. Lamp Handle Lamp Screws 5. Replace the new lamp module by the handle and tighten the screws. Lamp Handle 6. Place the lamp cover back in position and lock the 2 screws. 7.
-
Page 24: Specifications
English Specifications LCD panel Lamp Number of Pixels Displayable Color Projection Lens Image Size Projection Distance Computer Compatibility Video Compatibility H. Frequency V. Frequency Multimedia Audio Power Supply I/O Connectors Weight Dimensions (W x H x D) Environmental Safety Regulation - active matrix TFT color LCD - 0.9”... -
Page 25: Compatibility Modes
Compatibility Modes Mode & & & & & & & & & & " 3 " 3 " 6 " 9 *: Compressed H.Frequency Resolution (kHz) English V.Frequency (Hz)
Need help?
Do you have a question about the Optoma EP 610 (H) and is the answer not in the manual?
Questions and answers