Extreme Networks Sentriant AG200 Hardware Installation Manual page 24

Startup and Configuration
4 Respond to the Accept license agreement window in one of the following ways:
If you do not wish to accept the license agreement, select I do not accept this license agreement.
●
or
Read the Sentriant AG End-User License Agreement and select I Accept this license agreement.
●
5 Click Next. The Enter management server settings window opens.
Figure 7: Enter Management Server Settings Window
6 The Date and time area is pre-populated with values entered during the initial installation process.
Change any of the following as necessary:
Region—Select a region from the drop-down list.
●
Time zone—Select a time zone from the drop-down list.
●
NTP servers—Enter one or more Network Time Protocol (NTP) servers (for example,
●
time.nist.gov), separated by commas. The NTP allows Sentriant AG to synchronize its date and
time with other endpoints on your network.
7 The Network settings area is pre-populated with values entered during the initial installation
process. Change any of the following as necessary:
Host name—Enter a fully qualified domain name (FQDN) (for example, crocus.mycompany.com).
●
DNS IP address—Enter one or more DNS resolver IP addresses, separated by commas,
●
semicolons, or spaces (for example, 10.0.16.100,10.0.1.1).
24
Sentriant AG200 Hardware Installation Guide