KitchenAid KERC507 Use And Care Manual page 58

rYroubleshooting
PROBLEM POSSIBLE CAUSE WHAT TO DO
The display is There has been a power Reset the clock. (See page 22.)
showing "PF" failure.
A letter followed
by the number
shows on the
display (for
example "E3",
"F1 ")
Press CANCEL/OFF. If the code
does not disappear, call for service.
(See "Requesting Assistance or
Service" on pages 59-60.)
The display is The power cord is not prop- See Installation Instructions.
showing "F5" erly grounded.
or "E3"
The display is The oven is in the "Convect Refer to Section "Using convect full
showing "CF" full meal" mode. meal",
The key pads The Control Lock has been Turn off the Control Lock by opening
do not operate set. the oven door, pressing and holding
the Control Lock pad (Number Pad
3) for 5 seconds. (See "Using the
control lock" on page 18.
The Sabbath mode has
been set. ("SAb" appears
on the display.)
Turn off the Sabbath mode by open-
ing the oven door, waiting up to 15
seconds, and pressing and holding
Number Pad 6 for 5 seconds.
If none of these items was causing your problem, see "Requesting Assistance or Service" on
page 59 and 60.
58