Installing The Hultipurpose Blade; Using The 2-In- I Feed Tube - KitchenAid KFP0711 Instructions Manual

Installing the
Hultipurpose Blade
I. Place the blade on the power shaft.
2. Rotate the blade so it falls into place
on the power shaft.
m
3. Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it wilt go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
Using the 2=in=
The 2-in- I feed tube
features a 2-piece
food pusher. To slice
or shred small items,
insert the 2-piece
food pusher into the
feed tube.
Use the small feed
tube and pusher to
process small or
slender items, like
single carrots or
celery stalks.
To slowly drizzle oil
into ingredients, just
fill the small pusher
with the desired
amount of oil.
A small hole in the
bottom of the
Feed Tube
2=Piece
Food
Pusher
pusher will drizzle the oil at a constant rate.
4. Install the work bowl cover, being sure
it locks into place. See '_ttaching the
Work Bowl Cover" section.
12