Installation
spacing
The following spacing dimensions are recommended
for this
washer. This washer has been tested for installation with spacing
of 0" (0 cm) clearance on the sides, front, rear, and top.
Recommended
spacing should be considered for the following
reasons:
•
The location must be large enough to allow the washer door
to be fully opened.
•
Additional spacing should be considered for ease of
installation and servicing.
•
Additional clearances might be required for wall, door, and
floor moldings.
•
Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended
to reduce noise transfer.
•
Companion appliance spacing should also be considered.
Washer Dimensions
42"
(106.7 cm)**
33" (83.8 cm)*
(68.6
Cm)_'-_--_/L_
*Includes the door handle.
**Includes the feet extended 1" (2.5 cm).
The optional decorative mat (included)
will add approximately
1/2"(1.3 cm).
NOTE: Door is not reversible.
Recommended
installation
spacing for custom
undercounter
installation,
washer
only
•
The dimensions
shown are for a washer without the optional
decorative mat placed on top.
f
42" rain.
(106.7 cm)
Recommended
installation spacing for recessed or
closet installation,
with or without a pedestal
•
For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent openings are acceptable.
\_/
u
--
.3
l"_-
27"÷11_-1,, -_ll,,
(2.5 cm)
J_3_E
48 in?
(7.6 crn)
(310cm 2),_
===_
_- 3s,,-_l4"_
{68.6cm)
{2.5cm)
{2.5cm)
{83.8cm)
(/0.2cm)
A
B
/
24in?
h
(15s c rn_) * - -I_1
_ ._"_rn)_
+
C
A. Recessed area
B. Side view - closet or confined
area
C. Closet door with vents
*Required spacing
Recommended
installation spacing for cabinet
installation,
with or without a pedestal
•
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
"i"
(2,Scrn)(68,6cm)(2,Scrn)
(2,Scrn) (83,8cm)
(10,2crn)
A
B
7" (17,8cm)*
"
,
)*
......
33"
4 _
A.Front view
B. Side view
C. Cabinet with vents
*Required spacing