Download Print this page

Loading The Dryer; Check The Lint Filter Before Every Load - Kenmore 796.6152 Series Use & Care Manual

Sears
Hide thumbs

Advertisement

Table of Contents
WARN
I N G:
To reduce the risk of fire, eiectric
shock, or injury to persons,
read this enffre manual,
including the important
Safety instructions,
before operating
this dryer.
SORTING
LOADS
Fabric
Care
Labels
Most articles of clothing feature
fabric care labels that
include instructions
for proper care.
Tumble
[_
J_
D
dry
Dry
Normal
Permanent
Press/
wrinkle
resistant
Heat
setting
Gentle/
Do not
Do
not dry
delicate
tumble
dry
(used
with
do
not wash)
@ ®
®
®
High
Medium
Low
No heat/air
Group Similar Items
For best results, sort clothes into loads that can be dried
with the same drying
cycle.
Different
fabrics
have different
care requirements,
and
some fabrics will dry more quickly than others. For best
fabric
care results, always dry fabrics
with similar care
requirements
together.
LOADING
THE DRYER
A WARNING:
To reduce the risk of fire,
electric shock, or injury to persons when using this
appliance,
follow basic precautions,
including the
following:
•Check all pockets to make sure that they are empty.
Items such as clips, pens, coins, and keys can damage
both your dryer and your clothes. Flammable
objects
such as lighters or matches could ignite, causing a fire.
Failure to do so can result in fire, explosion,
or death.
• Never dry clothes that have been exposed to oil,
gasoline, or other flammable
substances. Washing
clothes will not completely
remove oil residues. Failure
to obey this warning
can result in fire, explosion,
or death.
Loading Tips
• Combine large and small items in the same load.
• Damp clothes will expand as they dry. Do not overload
the dryer; clothes require room to tumble and
dry properly.
• Close zippers, hooks, and drawstrings
to prevent these
items from snagging
or tangling
on other clothes.
CHECK
THE LINT FILTER BEFORE EVERY LOAD
Every time the dryer is turned on, the CHECK FILTER
light will blink as a reminder
to make sure the filter is
clean. Always
make sure the tint filter is clean before
starting
a new toad; a clogged
tint filter will increase
drying times. To clean, pull the lint filter straight
up and
roll any tint off the filter with your fingers. Do not rinse
or wash the filter to remove lint. Push the lint filter firmly
back into place.
Always ensure the lint filter is properly
installed
before
running the dryer. Running the dryer with a loose or
missing tint filter may damage
the dryer and articles in
the dryer.
Lint Filter
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

796.7152 series