the risk ofnre, electrlc shock,
feud t his e.tire
manual, includlng the important Safety instructions, before operating this dryer.
Press to turn the dryer ON. Press again to turn the
dryer OFF. Pressing the POWER button during a cycle
will cancel that cycle and any settings will be lost.
CYCLE SELECTOR KNOB
The cycle selector knob is used to select the desired
dry cycle by rotating the knob in either direction until
the desired cycle LED is illuminated.
Once the desired
cycle has been selected, the standard presets for that
cycle will show in the display. These settings can be
adjusted using the cycle modifier or option buttons
any time before starting the cycle.
Press this button to start the selected cycle. The
dryer will display the estimated
time (AUTO DRY) or
set time (TIMED DRY) remaining
and start tumbling.
To pause the cycle at any time, open the dryer door
or press START/PAUSE. To resume the cycle where it
press START/PAUSE again.
NOTE: If the dryer has been stopped for more than
four minutes, the dryer wilt turn off automatically
and all settings will be lost.
These buttons allow you to select cycle options.
Some of the option buttons have secondary
The controls can be locked or unlocked by
pressing and holding the CONTROL
for five seconds.
Use these buttons to adjust the settings for the
selected cycle. The settings light up above the
buttons to show the current selection. The defautt
setting cannot be changed
DRY cycles. AUTO DRY cycles are modified
the Dry Level button.
TiME AND STATUS DISPLAY
The display shows the estimated
auto cycles and actual time for timed cycles. The
status of the cycle is also displayed.
VENT indicator witl illuminate if there is a serious
in the exhaust system.
NOTE: To protect your fabrics, not all settings are allowed
in all cycles.