Advertisement
Available languages
Available languages
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissorsto remove any build-up entan-
gled around the agitator.
__
- ........
•
....
Always follow all safety precautions
when
performing maintenance to the vacuum
cleaner.
Plug in the vacuum cleaner and turn it on.
Stretch the extension hose to maximum
length and then allow the hose to return to
its natural length.
ElectricalShock Or PersonalInjury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could resuR in elee-
b'lcaJshock or personal Injury from
vacuum cleaner suddenly starting.
If the vacuum cleaner does not seem to have
adequate
suction, first check if the dust bin is
full or if a filter is clogged. See DUST BIN
CLEANING and FILTER REPLACEMENT.
('_iO_ar_
t_sl°n
If the dust bin and filter areas are free of
clogs, check the extension
hose. Rotate the
extension hose release lever counterclock-
wise to release extension hose.
H°_e r
"
i
_ii;i
;=1
r_
HOlder
Extension
Hose"
_
:_ _ (Jj
Hose
Remove the lower end of the extension
hose
from the wand holder by grasping the hose
collar, twisting, and pulling straight up.
Re-insert the hose into the opening on the
body from which it was removed. Press firmly
to assure connection.
Rotate hose release
lever clockwise to the locked position.
If the {:lustbin and filter areas and the hose
areas are free of clogs, disconnect
the noz-
zle hose from the wand holder and check the
nozzle for clogging.
WARNING
Personal Injury Hazard
DO NOT place hands or feet under-
neath the unit at any time.
Clean the agitator according to the instruc-
tions in the AGITATOR
CLEANING
section.
Return the vacuum cleaner to the upright
position before plugging into an electrical
outlet.
19
Advertisement
