Before You Call - Solutions To Common Problems - Frigidaire FGGF3054MBB Use & Care Manual

Electrolux
Hide thumbs Also See for FGGF3054MBB:
Table of Contents

Advertisement

Problem
Possible Causes
Solutions
Display flashes time.
Power interruption.
Press cancel then set the correct time of day.
Oven control
displays
F
(followed with
a number) and oven
control beeps.
The oven control has
Press cancel to clear the display & stop beeping. Try bake or
detected a fault or error
broil feature again. If the F code error repeats, remove electric
condition,
power from appliance, wait 5 minutes and then repower
appliance and set clock. Try bake or broil feature again.
Error condition recurs.
Record fault code and call your authorized service agent.
The oven does not
Pressed outside keypad area.
Be sure to press center of keypad using flat portion of finger.
respond or error
Oven lock may be active.
Cancel the oven lock feature.
tone sounds when a
keypad is pressed.
No electric service.
See "Entire appliance does not operate" in this checklist.
New oven cooks
Difference in oven
For the first few uses, follow your recipe times and temperature
hotter or cooler than
temperature
settings between
recommendation carefully. If you feel the oven is too hot or cool
previous experience,
the old and new range,
from your previous cooking experience, try offsetting the oven
temperature.
See "Adjusting the oven temperature" in Settino
Oven Controls section.
Odor or some
New appliance.
It is possible to experience some odors and/or a small amount
smoking coming
of smoke from a new range. The odor will diminsh after first
from the oven
using the oven. Before cooking for the first time, turn the oven
during first few
ON to 400°F for 30 minutes to one hour. This will allow for an
uses.
intitial burn-in period and help eliminate odors. If necessary,
ventilate the kitchen by opening a window.
Appliance makes
Oven expands and contracts
This is normal.
popping sounds,
while heating and self-clean.
This is normal.
Control panel makes
The oven control is cycling
clicking noises,
the oven ON and OFF.
Warm air or steam
Moisture coming from food
from oven vent area.
while cooking in oven.
Poor baking or
Incorrect oven control setting.
roasting results.
This is normal. To ensure the best possible results, do not
block the oven vent area when cooking.
See Settino Oven Controls section and review instructions for
..............................................................................................................................................
the es{redco0k!no function: ............................................................
Oven vent may be blocked.
Clear any cookware or items that is blocking the oven vent area.
Incorrect cookware type or
Dark or dull pans absorb more heat than shiny bakeware resulting
size.
in overbrowning of some foods. Try reducing the oven temperature
or cook time to prevent overbrowning. Dark pans are
recommended for pies; shiny pans for cakes, cookies and muffins.
Bake started with cold oven.
Let oven preheat before placing food on oven rack.
Incorrect oven rack position.
Adjust oven rack position upward or downward as needed.
Inadequate space around
Try centering food in oven for single items. When cooking multiple
food items or air flow is
food items space cookware to allow air to circulate completely
blocked by oven liner or using
around the food items. Review "Aluminum foil and liners" in the
aluminum foil as a liner.
Care & Cleanino
section.
Oven temperature or time
Try adjusting the recipe's recommended temperature or cooking
settings,
time. If you still feel the oven is too hot or cool, try offsetting the
oven temperature.
See "Adjusting the oven temperature" in
Setting Oven Controls section.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents