Changing Oven Temperature Display Mode; Setting For Audible Or Silent Keypad Operation; Setting Oven Lock - Frigidaire FGGF3054MBB Use & Care Manual

Changing oven temperature display mode
The oven control is preset to display the oven temperature
with Fahrenheit values. The control may be changed to
display either Fahrenheit or Celsius temperatures.
To change the temperature display mode:
Step Press
1. Press and hold broil for broi[
6 seconds.
2. Press self-clean to toggle serf
dean
between Fahrenheit or Celsius
temperature display modes and
release keypad when the mode
you prefer is displayed.
3. Press start to accept, start
The temperature display mode option cannot be
changed when the oven is active with any cooking
function or during self-clean.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
To switch between audible or silent keypad
operation modes=
.
.
Step Press
Press and hold de[ay
start
delay start for 6 seconds.
serf
Press self-clean dean
to toggle between "bEEP On" (Fig. 1)
or "bEEP OFF" (Fig. 2). Release
keypad when the mode you prefer
is displayed.
3. Press start to accept, start
Fig. 1 Fig. 2
When the control is set for silent keypad operation the
timer, preheat and any end of cycle or error tone
alerts will remain audible.
Setting oven lock
The control may be programmed to lock the oven door
and lock the oven control keypad operations.
To activate the oven lock feature=
Step
Press and hold lock keypad for 3 seconds.
"door Loc" will appear in the display until
the oven door is completely locked.
Press
To cancel the oven lock feature=
Step
Press and hold lock keypad for 3 seconds.
Once the oven door has unlocked the
"door Loc" message will no longer display
(See Fig. 3).
Fig. 3
Press
• To avoid possible damage to the oven door latching
ii •
mechanism, do not attempt to force open the oven
door whenever the door Loc message is displayed.
If a control keypad is pressed when oven lock is
active, the oven control may produce an error tone
(triple beep) indicating the keypad action requested is
not available when the oven lock feature is active.