Table of Contents
Advertisement
BEFORE YOU CALL
Problem
Possible Causes
Display flashes time.
Power interruption.
Oven control displays
The oven control has detected
F __ (followed with
a fault or error condition.
a number) and oven
control beeps.
Error condition recurs.
The oven does not
Pressed outside keypad area.
respond or error
Oven lock may be active.
tone sounds when a
No electric service.
keypad is pressed.
New oven cooks
Difference in oven temperature
hotter or cooler than
settings between the old and
previous experience.
new range.
Odor or some
New appliance.
smoking coming from
the oven during first
few uses.
Appliance makes
Oven expands and contracts
popping sounds.
while heating and self-clean.
Control panel makes
The oven control is cycling the
clicking noises.
oven ON and OFF.
Warm air or steam
Moisture coming from food
from oven vent area.
while cooking in oven.
Poor baking or
Incorrect oven control setting.
roasting results.
Oven vent may be blocked.
Incorrect cookware type or
size.
Bake started with cold oven.
Incorrect oven rack position.
Inadequate space around food
items or air flow is blocked by
oven liner or using aluminum
foil as a liner.
Oven temperature or time
settings.
36
• Solutions to common problems
Solutions
Press cancel then set the correct time of day.
Press cancel to clear the display & stop beeping. Try bake or
broil feature again. If the F code error repeats, remove electric
power from appliance, wait 5 minutes and then repower
appliance and set clock. Try bake or broil feature again.
Record fault code and call your authorized service agent.
Be sure to press center of keypad using flat portion of finger.
Cancel the oven lock feature.
See "Entire appliance does not operate" in this checklist.
For the first few uses, follow your recipe times and temperature
recommendation carefully. If you feel the oven is too hot or
cool from your previous cooking experience, try adjusting the
oven temperature. See "Adjusting the oven temperature" in
Setting Oven Controls section.
It is possible to experience some odors and/or a small amount
of smoke from a new range. The odor will diminish after first
using the oven. Before cooking for the first time, turn the oven
ON to 400°F for 30 minutes to one hour. This will allow for an
initial burn-in period and help eliminate odors. If necessary,
ventilate the kitchen by opening a window.
This is normal.
This is normal.
This is normal. To ensure the best possible results, do not
block the oven vent area when cooking.
See Setting Oven Controls section and review instructions
for the desired cooking function.
Clear any cookware or items that is blocking the oven vent
area.
Dark or dull pans absorb more heat than shiny bakeware
resulting in overbrowning of some foods. Try reducing the oven
temperature or cook time to prevent overbrowning. Dark pans
are recommended for pies; shiny pans for cakes, cookies and
muffins.
Try preheating the oven before placing food on oven rack.
Adjust oven rack position upward or downward as needed.
Try centering food in oven for single items. When cooking
multiple food items space cookware to allow air to circulate
completely around the food items. Review "Aluminum foil and
liners" in the Care & Cleaning section.
Try adjusting the recipe's recommended temperature or
cooking time. If you still feel the oven is too hot or cool, try
adjusting the oven temperature. See "Adjusting the oven
temperature" in Setting Oven Controls section.
Advertisement
Table of Contents
