Setting Oven Controls; Changing Oven Temperature Display Mode; Setting For Audible Or Silent Keypad Operation; Setting Oven Lock - Frigidaire FGEF3058RF Use & Care Manual

Changing oven temperature display mode

The oven control is preset to display the oven temperature
with Fahrenheit values. The control may be changed to
display either Fahrenheit or Celsius temperatures.
To change the temperature display mode:
Step
1. Press and hold broil for
6 seconds.
2. Press self-clean to toggle
between Fahrenheit or Celsius
temperature display modes and
release keypad when the mode
you prefer is displayed.
3. Press start to accept.
NOTE
The temperature display mode option cannot be
changed when the oven is active with any cooking
function or during self-clean.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the control may be set for silent keypad
operation.
To switch between audible or silent keypad
operation modes:
Step
1. Press and hold delay start
for 6 seconds.
2. Press self-clean
to toggle between "bEEP On" (Fig. 1)
or "bEEP OFF" (Fig. 2).
Release keypad when the mode you
prefer is displayed.
3. Press start to accept.
Press
When the control is set for silent keypad operation the
timer, preheat and any end of cycle or error tone
alerts will remain audible.

Setting oven lock

The control may be programmed to lock the oven door
and lock the oven control keypad operations.
To activate the oven lock feature:
Step
Press and hold lock keypad for 3 seconds.
"door Loc" will appear in the display until
the oven door is completely locked.
To cancel the oven lock feature:
Step
Press and hold lock keypad for 3 seconds.
Once the oven door has unlocked the
"door Loc" message will no longer display
(See Fig. 3).
Press
• To avoid possible damage to the oven door latching
mechanism, do not attempt to force open the oven
door whenever the door Loc message is displayed.
• If a control keypad is pressed when oven lock is active,
the oven control may produce an error tone (triple
beep) indicating the keypad action requested is not
available when the oven lock feature is active.
SETTING OVEN CONTROLS
Fig. 1
NOTE
Fig. 3
NOTES
Fig. 2
Press
Press
17