Table of Contents
Advertisement
Adjusting the oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature.
For the first few
uses, follow your recipe times and temperature
recommendations
carefully. If you thinkthe oven is cooking
too hot or too cool for your recipe times, you can adjust the
control so the oven cooks hotter or cooler than the
temperature displayed.
The oven temperature
may be increased +35°F (+ 19°C) or
decreased -35°F (-19°C) from the factory settings.
Example: increase the oven temperature
by 30°F:
Step
Press
1.
Press and hold bake
bake
for 6 seconds.
2.
Enter30.
3 0
3.
Press start,
start
Example: decrease the oven temperature
by 30°F:
Step
Press
1.
Press and hold bake
bake
for 6 seconds.
2.
Enter30.
3 0
3.
Press self=clean,
self
dean
4.
Press start,
start
Oven temperature
adjustments
made will not affect the
broil or self-cleaning feature temperatures.
If the temperature
shows an adjustment of-30°F, and a
+30°F adjustment is needed, you can toggle between the
(-) or (+) in the display by pressing self clean.
DO NOT USE oven thermometers
such as those found in
grocery stores to checkthe temperature settings inside your
oven. These oven thermometers may vary as much as 20 to
40 degrees from actual temperatures.
Restoring factory
default
settings
When new, your appliance left the factory with
predetermined oven control default settings. Over time, the
user may make changes to these settings. The following
options have user preferences that could be modified and
may have been changed since the appliance was new:
• 12 or 24 hour display mode
= Continuous bake or 6=Hour Energy Savings mode
• Silent control panel
• Oven temperature
display (Fahrenheit
or Celsius)
= Adjusting
the oven temperature
= My favorite
Please remember that if you choose to restore, ALL of the
above preferences will be restored to factory default
settings, the oven temperature offset will reset and any
stored information will be cleared.
To restore all user settings to factory
default:
Step
Press
1.
Press and hold 7 key pad
7
until first beep sounds
(about 6 seconds).
2.
Press start,
start
Operating
the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press _-) to turn the interior oven light ON and OFF
whenever
the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield. The
glass shield must be in place whenever the oven is in use.
The shield will protect the halogen bulb from food splatters.
To change the interior oven bight, see "Changing the oven
bight" in the Care &Cleaning
section.
Advertisement
Table of Contents
