Specifications; Model Numbers; Specifications 2.1 Model Numbers; Engine - Exmark Lawn Tractor Operator's Manual

Exmark mfg. co. inc. lawn tractor operator's manual
Table of Contents

Advertisement

2. SPECIFICATIONS

2.1 MODEL NUMBER:
LZ23KC524AS; LZ25KC604AS

2.2 ENGINE:

2.2.1
Engine Specifications: See your Engine Owner's Manual
2.2.2
RPM: Full Speed: 3750 RPM (No Load)

2.3 FUEL SYSTEM

2.3.1
Capacity: 11 gal. (42 L.)
2.3.2
Type of Fuel: Regular unleaded gasoline, 87 octane or higher
2.3.3
Fuel Filter: In-line 15 Micron Kohler P/N 2405002.
2.3.4
Fuel Shut-Off Valve: 1/4 turn increments (left tank, "OFF", right tank)

2.4 ELECTRICAL SYSTEM

2.4.1
Charging System: Flywheel Alternator
2.4.2
Charging Capacity: 15 amps
2.4.3
Battery Type: BCI Group U1
2.4.4
Battery Voltage: 12 Volt
2.4.5
Polarity: Negative Ground
2.4.6
Fuses: Two 20 amp blade type
2.4.7
Safety Interlock System:
PTO must be disengaged, brake engaged, and motion control levers out
(neutral lock) to start engine. (It is not necessary for the operator to be in the
seat to start the engine.)
Operator must be in seat when PTO is engaged, brake is disengaged, or
motion control levers are moved in or engine will stop.
Engine will stop if either the left, the right, or both levers are moved from neutral
lock position while brake is engaged.

2.5 OPERATOR CONTROLS

2.5.1
Steering and Motion Control:
Separate levers, on each side of the console, control speed and direction of
travel of the respective drive wheels.
Steering is controlled by varying the position of the levers relative to each other.
Moving motion control levers outward (in slots) locks the drive system in neutral.
NOTE: Motion control levers are adjustable to two heights.
2.5.2
PTO Engagement Switch: Engages electric clutch (to drive belt) which engages
mower blades.
2.5.3
Parking Brake Lever: Engages parking brake.
2.5.4
Deck Height Adjustment Lever: Sets cutting height to desired position.
NOTE: The Deck Lift Assist Lever is an optional accessory (This lever is a foot
pedal that assists in raising the deck).

2.6 SEAT

2.6.1
Type:
Standard seat with high back, foam padded (internal suspension) and armrests.
NOTE: The following are optional seat accessories:
Idle: 1500 RPM
- 11 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lazer z advantage series

Table of Contents