Door Shelves; Adjustable Cantilever Shelves - Kenmore 5969535680 Use And Care Manual

Installing and Using Specific Features (continued)
Door Shelves
Two styles of shelves on refrigerator door can be
removed for cleaning.
a. Remove all food from shelves.
b. Move shde-'m--style shelf by grasping each side
of shelf retainer. Pull shelf straight up and out.
See Figure 10.
Adjustable
Cantilever Shelves
Supported by metal tracks on the rear wall of
refrigerator compartment, shelves can be
adjusted to best match size of stored items. See
Figure 12,
Figure 10
c. To remove hook-style shelves for cleaning,
gently tap upward underneath both ends. Lift
and rotate bottom of shelf outward to release
hooks from door slots.
d. To reinstall, tilt shelf and insert upper hooks
into selected slots. Rotate shelf toward door
and insert lower hooks into door slots.
e. Hold shelf against door and tap down gently
on both ends until shelf is seated securely. See
Figure 11.
Figure 12
a. Remove cantilever shelf by lifting upward at
back edge of shelf near metal track to loosen
shelf hooks, See Figure 13,
Figure 11
I
f
CAUTION
Gently apply pressure to front edge
of shelf to insure proper installation.
Handle tempered-glass shelves with
care. Place on soft surface after
removing. Do not expose shelves to
rapid temperature changes. Replace
shelves immediately if they become
chipped or cracked, as sudden
breakage could occur.
Figure13
b. Tilt up on front edge of shelf and pull out. See
Figure 14,
7
Figure 14
c. Reinstall shelf by inserting upper rear metal
shelf hooks into desired wall slots, as front
edge of shelf is tilted up. Gently press down on
front edge of shelf until lower hooks are firmly
seated in rear wall slots and shelf is level.