Dryer Use; Drying, Cycle, And Temperature Tips; Fabric Temperature Control; Cleaning The Lint Screen - Kenmore 110,84182 Use & Care Manual

240-volt compact electric dryer
Hide thumbs Also See for 110,84182:
Table of Contents

Advertisement

Available languages

Available languages

DRYER USE
PUSH TO START
FABR|C
TEMPERATURE
PEBMANENT
PBESS
MEDBUM
DELICATE
_
COTTON
TIMED
WRINKLE
GUARD
I
OFF
70
DRY
LESS DRY
--
AUTO DRY |
NORMAL
DRY-
[_4ORE DRY --
OFF
20
TOUCH
AiR DRY 30
UP
Expmosion Hazard
Keep flammabme materials
and vapors, such as
gaeomine, away from dryer.
Do not dry anything
that has ever had anything
flammable
on it (even after washing).
Failure to follow
these instructions
can resumt in death,
e×pmosion, or fire.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean the lint screen before or after each cycle. See
"Cleaning the Lint Screen."
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended
cycle for
the type of load being dried. See "Drying, Cycle, and
Temperature Tips."
Fire Hazard
No washer can completemy remove oil
Do not dry anything
that has ever had any type of oil on
it (including
cooking
oils).
items containing
foam, rubber,
or plastic must be dried
on a clothesline
or by using an Air Cycme.
Failure to follow
these instructions
can resumt in death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
4. Set the Fabric Temperature Control knob to the
recommended
cycle for the type of load being dried. See
"Fabric Temperature Control."
5. Press the PUSH TO START button.
::::::::::::::::::::::
You can stop your dryer any time during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFE
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Press the PUSH TO START button.
15

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

110.84182

Table of Contents