Advertisement
REMOVABLE
COOKTOP
UNITS
The cooklop elements can be unplugged
and the bowls
removed for cleaning.
Be sure all cooktop
unit control
knobs are turned
off and elements
are cool before
you remove
or
replace
a cooktop
unit.
To remove:
14 Grasp element, tilt It upward
slightly to clear the
bowl, then pull away from the receptacle° The element
will not sit level when replaced
if it is forced too far
upward when removed.
2. Lift oul the bowl.
Do not put the element into water. It cleans itself when
heated during normal use°
When removing,
do not lift a plug-in unit more than I'L
If you do, It may not lie flat on the reflector bowl when you
plug it back In. Repeated lifting of the plugqn unit more
than l" above the reflector bowl can permanently damage
the receptacle°
ELEMENTS
REFLECTOR
BOWLS
RECEPTACLE
To replace:
1, Replace the bowl. Be sure the receptacle is showing
In the bowl opening.
2. Slide the plug of the element firmly into the receptacle
and lower the element into place.
2O
NEMNT105
Advertisement
