Advertisement
REMOVABLE
OVEN
RACKS
BUMPED-IN
RACK GUIDES
Be careful
not to scratch
the oven finish when
installing
or removing
over= racks.
To install:
1o Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way tn.
To remove;
1oPull the oven rack out, then upo
HOTE:
The racks are designed
with stop locks.
When
the racks
are placed
correctly
on the rack sup.
port and extended
from the oven, the stop lock
prevents
the
racks
from
til_ing
when
you are
removing
food from
the racks or placing
food on
them.
REMOVABLE
OVEN
DOOR
BROIL STOP
POSITION
/
/
To remove=
1_ Open the door to the stop position (see illustrati_
2. Grasp the door at each side and lift up and oI! th,
hinges° DO NOT lift the door by the handle.
NOTE: When the door is removed
and hinge arrn_
are at stop position,
do not bump or try to move
the hinge
arms.
The
hinges
could
snap bacl_
causing
an injury to the hands or damage
to the
porcelain
on the
front of the range.
Cover the
hinges with toweling
or empty
towel
rolls while
working
in the oven area.
To replace_
1, Hold the door over the hinges with the slots at tile
bottom edge of the door lined up with the hinges
The
hinge
arms
must
still
be
in the
stop
position.
2. Slide the door down onto the hinges as tar as it wifl
go and close the door.
This
drawer
gives
you
space
for
keeping
cookware
and bakeware.
Plastics
and flammable
material
should not be kept in this dr_:-_er=
Do not overload the storage drawer. If the drawer is too
heavy, it maystipoffthetrackwhenopened.
Toopenthe
drawer, grasp the center of the handle and pull straighl
ouL
To remove:
Pull drawer straight out and lift over the
guide stops,
To replace=
Lift over the guide stops and slide drawer
into place.
18
NEMNT104
Advertisement
