Advertisement
The Self-Clean Cycle (contlnuedo_.)
2. Turn the OVEN
CONTROL
KNOB
to the CLEAN
position.
The LOCK
DOOR indicator
Light will blink alerting
you that the door lock handle has not been engaged in
the lock position.
The display
will be showing
4:20.
The oven wlII
automatically
clean for 4 hours and 20 minutes.
Here's how to Increase or decrease cleaning time:
While 4:20 Is showing In the display and the colon (:) is
blinking,
press the HR= UP or DOWN arrow pad to
change the hours needed and press the MIN.
UP or
DOWN arrow pad to change the minutes needed. The
control will allow you 1 minute to make the change
before t_begins the cycle automatically.
3. Slide the door lock handle to the right into the lock
position. DO HOT fo_'ce the handle,
If It does not
slide easily, It may not be fully extended.
You may
also need to lightly press against the door to lock it
properly.
TO LOCK:
Once the door Is locked the OVEN
ON and LOCK
DOOR Ilnd_cator
Lights
will glow Indicating
the start
of the clean cycle.
Be sure the oven light Is off during the clean cycle to
prolong the life of the bulb.
You may press the CLOCK pad to return the display to
the time of day clock.
When the cycle ts finished, both the OVEN ON and the
LOCK
DOOR
Indicator
Lights
will blink until the
OVEN
CONTROL
KNOB
Is turned to the "OFF"
position. Unlock the door and raise the cooktop to hide
the handle.
TO STOP
A CLEAH
CYCLE
1. Turn the OVEN
CONTROL
KNOB
to the "OFF"
position.
2. Wait until the oven has cooled below the locking
temperature
(approximately
45 minutes to 1 hour)
before attempting
to slide the lock handte to the
left into the unlock position,
When the handle
slides easily, unlock
the door.
TO SET
A DELAYED
SELF-CLEAN
CYCLE
1, If the handle has been hidden, lift the cooktop and
pull the handle out as far as it wtll come,,
2. Follow
the steps
under
"BEFORE
A CLE!_,
CYCLE."
3. Make sure the clock is showing
the correct time _,'
day.
4o Turn the OVEN CONTROL
KNOB to the CEEAH
position.
The OVEN
ON and the LOCt_
DOOR
Bnd_c_o_
Lights
will blink alerting
you that tl_e door
_. ;
handle has not been engaged in the lock positior_
The display will be showing
4:20 and will automatics! _
clean for 4 hours and 20 minutes
unless you shinto'
Increase or decrease
the cleaning
time as inst{uL_.
In No. 2 under "TO SET A CLEAN
CYCLe,"
5
Slide the door lock handle to the right in th_ I_c_
position.
DO NOT torce
the handle_
II It dm
not slide easily, it may not be tully exte;_deu
_, _:
may also need to lightly press against the door i_
lock it properly.
When the Iocktsengaged_i_,
OVEN ON and the LOCK DOOR lndic_tar
Ligl_.-,
will glowo
6, Press the START
TIIME ON/OFF
pad°
7
Press the HR. and IVllIN. UP or DOWN arrow pad
to set the hour of the day you want the cycle t_J
start.
Once you have set the delayed
start, you may press
the CLOCK
pad to return
the display
to the time ot
day clock,
When
the start
time you set has bee_
reached,
the oven will automahcally
start the clean
cycle and will clean for the amount
of time cl_osen
When the clean cycle is finished,
both the OVEN
ON
and the LOCK
DOOR
indicator
Lights
will blink
Turn the OVEN
CONTROL
KNOB
to the "OFF"
position,
Unlock the door and raise the cooktop to
hide the handle,
, FTiER
CLEAN
CYCLE
After a clean cycle, you may
notice some white ash in the
._-_.
/
oven.
Just wipe it up with a __:'_,
damp cloth or sponge.
I1 white
spots
remain,
scrub
them with a soap-filled
steel wool pad. Be sure to rinse
thoroughly
with a white vinegar
and water mixture.
These deposlls are usually a salt residue that cannot be
removed by the clean cycle°
If the oven Is not clean after one clean cycle, the cycle
may be repeated.
16
NESCL37
Advertisement
