Oil The Underside; Oil The Face Cover Plate - Kenmore 19502 Owner's Manual

Oil the Underside
Oil the Face Cover Plate
®
\A
o
©
Fig. 1
Fig. 2
1. Tilt the machine head back.
2. Remove the bottom covers by loosening the two screws, A and B, under
the free arm. (Fig. 1)
3. Oil at the arrows shown in the illustration. (Fig. 2)
NOTE: No other oiling is required,
1. Oil at those points indicated by short arrows in the illustration above,
No other oiling is required.
DO NOT REMOVE the top cover or base cover. No customer service is
required in these areas.
92