Kenmore 66516835793 Use & Care Manual page 15

f
o o
SENSING WASHING
U/tr_ Wash Sensor , Ouietguard System
WATER HEATING CLEAN CONTROL LOCK
I (D D D D I _
QUICI(_'_
POTS NORMAL WATER CHINA RINSE,,,,,)
PANS WASH M SER WASH
SENSING CYCLES
"" 1
ATER INO.E
,J
Option What does it do?
Water Heat
® Automatic with Pots/Pans
+ Option for Norma] Wash and
Water Miser cycbs
® Not avaiiabie for China Wash
or Quick Rinse cycbs
No Heat Dry
® Option for Pots/Pans,
Norma] Wash, Water Miser
and China Wash cycbs
Delay Start
+ Option for any cycb
When should I use it?
To ensure water temperature in
Main Wash reaches 140°F
(60°C)+
Use when you do not need a
rapid dry cycle. Allow longer
drying times (overnight). Use
rinse agent to improve drying+
O
O
Use when you want to start a
cycle later.
Set delay to run dishwasher
during times when off-peak
utility rates are in effect or
when you are away from
home. Local utilities recom-
mend this to avoid heavy
usage of energy at certain
times of day+ 3,
When you select Water Heat, main wash
delays until water heats to 140°F (60°C)+
As water heats, washing action continues+
Water Heating status indicator glows and
electronic time display pauses until water
reaches proper temperature+
+ Turns off heating element in 30-minute dry
period.
+ Delay beginning of your selected cycle and
options in one hour increments up to nine
hours.
+ To set:
1. Press cycle and options.
2. Press Delay Start. Increase delay one hour
for each press of Delay Start pad+ Total
delay time appears on electronic time
display+
Press Start. Once Start is pressed, delay
begins. Delay time displayed on control
panel flashes once. Cycle and options
begin as soon as delay time expires. If
Start is not pressed within 30 seconds of
final selection, you need to re-select your
cycle, options and delay settings.
® You can change cycle and option selections
any time during delay period. You can also
eliminate the delay by pressing Start any
time. The dishwasher wiii start immediately+
14