Assembly Instructions; Handle - Kenmore 116.31100 Use & Care Manual

,,,,,,,,,,,,,,,,,,,,,,,,, ,, ,,,,,,,,,,,,, ,,,,, , , ,,,,,,,,,,,,,,,, ,,,,
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
_WARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in eletrical shock or
injury.
Before assembling the vacuum cteaner_
check the PACKING LIST. Use this list to
verify that you have received all the
components of your new Kenmore
vacuum cleaner.
I HANDLE
_, CAUTION
Do not overtighten.
Overtightenlng could strip the screw
holes.
De not operate the vacuum cleaner
without the screw in peace.
1. Remove the handle screw from the
body of the vacuum cleaner.
2_ Position the handle assembly as shown
in the illustration.
Handle-_,,
screw.3" Using a screwdriver, tighten handle Hole_-_
NOTE: It may be necessary to adjust the \\.\;
handle slightly. Handle /_
Screw /_ _,