Attachments - Kenmore 116.31100 Use & Care Manual

ATTACHME NTS
1
_CAUTION
DO NOT use the hose when vacuum cleaner
handle is tilted back into the floor cleaning
iposltion.
Always return the vaccum cleaner to the
upright position before using the hoseand
attachments.
Failure to do so may result in overheating of
the agitator motor and can cause the thermal
protector to trip
TO USE ATTACHMENTS
1. Place the vacuum cleaner in the
upright position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Ho,e i,&,_._,'_,
Ho_e
3. Use attachments as needed. See
ATTACHMENT USE TABLE.
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
_CAUTION
When using offachments, be careful not to
overextend the stretch hose when reaching.
Trying to reach beyond the hose stretch
capability could cause the vacuum cleaner
to tip over.
_, CAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Property damage or
personal injury could result.
TELESCOPING WAND
1. The wand
length is
adjustable and
requires no
assembly. To
adjust, simply
press the wand
button and slide
the wand to the
desired height.
2. Release button and continue to slide
wand until it locks into position.
COMBINATION BRUSH
The combination brush can be attached
directly to the wand.
Combination _
Brush BrushJ _L._
Holder
Use the brush holder without the brush
for greater suction on furniture cushions
or stairs.
Use brush holder with brushfor cleaning
loose surfaces such as drapes.
12