Table Of Contents - Delta 36-322L Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS ........................................................... 2
SAFETY GUIDELINES - DEFINITIONS ........................................................... 3
GENERAL SAFETY RULES .................................................................... 4
ADDITIONAL SPECIFIC SAFETY RULES ......................................................... 5
ADDITIONAL SAFETY RULES FOR THE LASER ................................................... 6
FUNCTIONAL DESCRIPTION .................................................................. 8
CARTON CONTENTS ......................................................................... 8
ASSEMBLY ................................................................................. 9
OPERATION ............................................................................... 10
TROUBLESHOOTING ........................................................................ 21
MAINTENANCE ............................................................................. 21
SERVICE .................................................................................. 23
ACCESSORIES ............................................................................. 23
WARRANTY ................................................................................ 24
ESPAI_IOL.................................................................................. 25
FRAN(_AIS ................................................................................. 47
_Read and understand all warnings and operating instructions before using any tool or equipment. When
using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury.
Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage.
There are certain applications for which tools and equipment are designed. Delta Machinery strongly recommends that
this product NOT be modified and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have contacted Delta
Machinery andwe have advised you.
Online contact form at www.deltamachinery.com
Postal Mail: Technical Service Manager
Delta Machinery
4825 Highway 45 North
Jackson, TN 38305
(IN CANADA: 125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
Information regarding the safe and proper operation of this tool is available from the following sources:
Power Tool Institute
1300 Sumner Avenue, Cleveland, OH 44115-2851
www.power toolinstitute.org
National Safety Council
1121 Spring Lake Drive, Itasca, IL 60143-3201
American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org
ANSI 01.1Safety Requirements for Woodworking Machines, and
the U.S. Department of Labor regulations www.osha.gov
SAVE THESE INSTRUCTIONSZ