Oven Light - Kenmore 911.95482 Use & Care Manual

CAREANDCLEANINQ
RemovableParts
CLEANING MATERIALS
,' Dishwashing detergent
• Warm water
,, Sofl clolh
Molded
Rib
Clear
Groove in
Spring
Clip
TO REMOVE
1. Be sure the control knob is in the
off position
2. Pull straight off: the stem.
Using a piece of string can make
removing the knob easier Slip the
string under and around the knob,
pulling straight out
TO CLEAN
Wash the knob thoroughly with
soapy water Dry completely with
a soft cloth DO NOT let the
knob soak.
TO REPLACE
1. Check the back of the knob
The molded rib of the knob is
designed to fit perfectly onto the
knob stem
2. Align the molded rib to the clear
groove in the knob stem
3. Push the knob back as far as it
will go
........ ,, 4k
CAUTION"
Disconnect
electrical power to
the oven at the main
circuit breaker or fuse box before
attempting to replace the oven
light bulb. Do not touch a hot
light bulb with wet hands or a
wet cloth. Wait until the bulb has
cooled and use a dry cloth.
Bail !fz'_.} Live Collar
Wire _-
Light
Bulb /"
Bulb Cover
TO REPLACE
Hold your hand under the bulb
cover and firmly push back the
bail wire, until it clears and
releases the bulb cover.
2. Unscrew the light bulb
3. Replace the bulb with a 3W'
40-watt appliance bulb
4, Place the bulb cover into the
grooves of the socket and pull the
bail wire forward until it rests in the
indentation on top of the bulb
cover
28