Display - Kenmore 911.95482 Use & Care Manual

OPERAtiON
OvenControl,Clock, and Timer
(cont,)
When the power to your range is
turned on for the first time, or if you
experience a power failure, the
display will flash "PF" By touching
the CLOCK pad, the display will flash
"12:00" Touch the CLOCK pad again
and follow the instructions to set the
clock. Any operation set before a
power failure will need to be reset.
The oven will automatioally shut off
if it has been left on for more than
t2 hours
To deactivate or reactivate the
automatic shutoff, touch and hold the
MIN UP and DOWN arrow pads for
about 4 seconds
14