A level floor with a maximum slope of 1" (25 mm) under
entire washer. Installing the washer on soft floor surfaces,
such as carpets or surfaces with foam backing, is not
recommended.
•
A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 Ibs (180 kg).
Do not operate your washer in temperatures
below 32°F (0°C).
Some water can remain in the washer and can cause damage
in low temperatures.
Installation
clearances
•
The location must be large enough to allow the washer door
to be fully opened.
•
Additional spacing should be considered for ease of
installation and servicing.
•
Additional clearances might be required for wall, door,
and floor moldings.
•
Additional spacing of 1" (25 mm) on all sides of the washer
is recommended
to reduce noise transfer.
Companion appliance spacing should also be considered.
Washer Dimensions
51"
(1295ram}
27"
(686 mrn}
311/2"
(800rnrn)
Recommended
installation
spacing for custom
undercounter
installation
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
The dimensions
shown are for the recommended
spacing.
Recessed
area or closet installation
34,,_
48in.2' _
(310cm2}
(864ram)
24 in. 2 *
(155 c m2) -
I1"N-311/2"÷14" F_-
(25mm)(800mm)(102mm)
3"
(70ram}
-f
8,,
(70ram}
-;F
A
B
A. Side view - closet or confined area
B. Closet door with vents
*Min. top and bottom air openings for closet door.
Recessed
or closet installation
- Washer on pedestal
1"--_---
27"---_=
1"
(25ram}
(686ram}
(25ram}
A
I1" I_ 311/2" _ 1 4"1
(25mm)(800mm)(102mm)
B
A. Recessed area
B. Side view - closet or confined area
The dimensions shown are for the recommended
spacing.
Custom
undercounter
installation
- Washer only
39" rain.
(990 ram)
+
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in.2 *
(310cm2)
+
T
24 in, 2*
(155 cm2)
3"* (76ram)
o
3"_ (76 ram)
'_- 1"* (25 mm)
*Required spacing