Number Buttons - JVC AV-27050 User Manual

BUTTON UNCTIONS
HYPER SURROUND
Create a deep, 3-dimensional sound
effect by channeling the sound through
the TV's front firing speakers.
HYPER SURROUND
HYPERSURROUND ON OFF
TVIVIDEO
TV/VIDEO contre/s the TV's input mode,
TV/VIDEO
_TV _ VIDEO 1_ VIDEO 2_
Model AV-32075 has one Video input,
> TV _ VIDEO >]
100 +
The 700+ button lets you access all
channels above Channel 99,
To move to Channel 124:
100+
2 (two)
4 (four)
VCR BUTTONS
RM-C341 and RM-C345 ONLY, This
remote wili contre/ your VCR, You can
play, rewind and fast-forward, record,
pause, stop, move channel up and
down, and power on and of L
Note: This remote is preset with the
code 000 to control a JVC VCR, For
any other brand, you must set up the
manufacturer's code (page 12,)
MUTING
The MUT/NC button turns the sound off
completely when you press it, Press it
again to restore the volume to the
predous level,
RETURN+
There are two kinds of Return.,,
Return+ -- Set a "Return Channel" to
return to after scanning with CHANNEL-/+,
RETURN+ and hold for 3 seconds
RETURN CHANNEL
PROGRAMMED !
Scan with CHANNEL -/+
RETURN+
Note: To cancel a Return channel, press
and hold Return+ for another 3 seconds
until "RETURN CHANNEL CANCELLED!"
appears,
Return -- Return to the last channel
dewed after moving to another channel
via the 70 key pad,
RETURN+
Move to another channel with
the 10 key pad,
RETURN+
Note: When PIP is on, the RETURN+button
function affects only the main screen,
NUMBER BUTTONS
10 KEY PAD
Change channels with the 70 key pad,
For example, to move to Channel 7:
0 (zero)
Hyper Surround
and VCR buttons
are available on
' AV-36050
' AV-36020
'AV-32050
• AV-32020
; AV-27050
You cart find
another discussion
Of Return and
Return+ on page
7
(seven)