JVC AV-27050 User Manual page 9

CONNECTIONS
CONNECTING TO JVC AV COMPU LINK
CAPABLE COMPONENTS
AV Compu LInK maKes playing video tapes tota y automatic. Simply nser[ a ore-recorded taue _ nto
the JVC brand VCR and the VCR automaticalN turns on and starts :)laying At the same time the
VCR sends an AV Compu LInK s_gnal to the telews_on telling _tto turn on and switch to [ne correct
video inout,
NOTE: The AV Compu Link cable may be included with the AV Compu Link capable accessory yo_
intend to connect. If it is noL contact an authorized JVC Service Center for Part//EWP 805-012,
JVC
AV Compu Link,
Ca_bl;e
VCR
LINK
NO TES:
A) The AV Compu Link cable has a male 3.5 mm (mono) mini plug on each end.
B) If your JVC brand VCR has A Code/B Code Remote Control Switching (see your VCR instructions),
using VCR A Code will switch the TV to Video Input 1. If you use Input 1 for Video out from the cable
box, use Input 2 here. Using __B Code will switch the TV to Video Input 2.
C) To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi
receiver's instructions for detailed hookup diagrams.
* In order for the VCR to startplayback automatically, the recording tabs must be removed from the VHS
tape, If the tab is in place, automatic switching starts when you push the VCR PLAYbutton,
** AV COMPULINK EX is compatible with the tollowing 1998 receivers, RX-664V, RX-665V, RX-774V,
RX-884 V, RX- 1024 V, and later receiver models,