JVC AV-27050 User Manual page 21

INITIAL SETUP
Accessing V-Chip Information:
To access Rating information about a
certain program, press the V-CHIP button
while viewing that program, this appears:
pROGRAM IS RATED
_-PG- V
Note:
For Childrens programming you can
block TV-Y and Y programs by
Pressing "0" when Y is displayed
during a program, Programming for
audiences other than children's
audiences will not be affected,
If you decide you want to block this
category of viewing, press "0" while the
above screen is visible, and all programs
from that category will be locked,
Example 1:
If you want to set your V-Chip settings to
block all programming above TV PG:
Press 0 (zero) when TV-PG is
displayed
[] mmm [] []
viFV 8 _
s
D _
All Programming above TV PG will
be blocked!
Example 2:
If you want to set your V-Chip settings to
block all programming above a current
setting such as TV PG-V (with violence):
Press 0 (zero) when TV-PG - V is
displayed
SET LOCK CODE
The Lock Code locks and unlocks
Channel Guard and V-Chip settings,
Write this four digit number down and
keep it safe!
Press the MENU button
AV To SET LOCK CODE
<• To operate
The padlock icon appears
j_l ZERO (the code is zero)
access
Loc cODE oo00
FINISH
"4• To choose the number
&,V To move to the next place
Continue to follow these directions for
aft four numbers
&V To FINISH
•'11• To save settings and exit
S _ _
All Programming above TV PG with
Violence will be blocked!
Note: If you forget the Lock Code
you can set another one this same
way,
Note; After a power interruption you
must reset the lock code,