Power; Number Buttons; Tune; Input - JVC PD-50X795 Service Manual

Button Functions

Power

Turns the TV on or off.
Press the P
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)

Tune

Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE
1 (One)
2 (Two)
Press the T

Input

Selects the signal input source for the television: Input-1, 2, 3, 4, DIGITAL-IN or i.LINK for
video devices like VCRs, DVD players or camcorders.
Press the I
NPUT
By every press of the I
Notes:
• When you return to TV mode, press the R
• You can also access the FRONT CONTROL PANEL screen by using the M
the back of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing M
√
buttons ( OPERATE
• If you have a PC connected to the TV, select INPUT 4.
• i.LINK can be selected only when you have an i.LINK device connected.

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the T
66
button
OWER
button. For example, to move to channel 12:
button
UNE
button
button, you can change the input mode.
NPUT
† on the back panel and choose a mode by using the C
ENU
®
).
P button
HEATER RO
+/TV button or direct 10 key pad.
ETURN
button on
ENU
+/-
HANNEL